Pagination:«12345»
Release:odinmould   Classification:About Mould Steel

Mould steels MAKING 1

The integrated cycle of mould and tool steel production usually starts with selected scrap.The first stage of processing takes place in an electric arc furnace, followed by refining and vacuum degassi

Read More...
Release:odinmould   Classification:Mould design guide

排氣系統 Venting System

 排氣系統Venting System當熔體進入型腔,空氣被置換。為了使空氣得以逃逸,一條

淺的排氣口可以加工在模面上。排氣道也可穿過模板,比如說,

在必要的位置加頂出銷,頂出銷和模板孔之間的小間隙就足以

...

Read More...
Release:odinmould   Classification:Mould design guide

Cold Runner and Hot Runner

 冷流道和成型零件一塊兒冷卻、固化、成型和頂出。熱流道

連接噴嘴與型腔(或冷豎澆道或冷流道),維持在熔融狀態下,
可以間歇性的注入型腔。
Cold runner is cooled, solidified, formed and ejected, with

...

Read More...
Release:odinmould   Classification:Mould design guide

澆注系統 Runner System design

 在射出成型模中以流路將(射出成型機的)噴嘴和型腔連接起

來。此一流路稱為澆注系統,一般包含了豎澆道、流道和澆
A flow-way is provided in the injection mold to connect the
nozzle (of the injection machine) to each cavity. This flowway
is termed the feed system. Normally the feed system

...

Read More...
Release:odinmould   Classification:Mould design guide

mould Parting Surface

分模面Parting Surface

模具的分模面是模板和模穴鄰接的部分,這部分面對面接觸,

以形成密封,以防熔體自腔型溢出。分模面可分為平面或非

... Read More...
Release:odinmould   Classification:Mould design guide

Plastics Injection Mold Structure simply introduce

模具的構造 Mold Structure模具的構造主要可分為下列五部分:1.模座(Mold Base)2.型腔(Cavity)3.流道系統(Runner System)4.冷卻系統(Cooling System)5.頂出系統(Ejection System)型腔Cavity射出成型模是由一組部件組成的總成。部件中有一稱為型腔者,熔體注入其中,繼之以冷卻定型。型腔是由兩部分組成:1.母模;

Read More...
Release:odinmould   Classification:Hot Runner

hot runner system you can make yourself

  Make Your Own Hot RunnersSome injection mold makers are capable of making their own hot runners. The advantage is that one company can take full responsibility of the entire mold and it re

Read More...
Release:odinmould   Classification:Surface treatment

影响产品和模具光泽度的因素

  光泽度,是产品外观和品质的重要因素,光泽度直接影响到纹理的外观,特别是对于较幼的砂纹,如果光泽度较低,那么产品的纹理看起来较晦暗,并且会显得较浅;如果光泽度较高,纹路看起来就比实际的深;有许多因素会对光泽度产生影响,我们在过去的蚀纹工作中,积累了很多这方面的经验,在此列出来供大家参考:1. 塑胶材料型号  2. 前模温度  3. 后模温度  4

Read More...
Release:odinmould   Classification:Hot Runner

Hot Runner Design

 The hot runner system accommodates the molten plastic material coming from the barrel and guides it into the mold cavity. A hot sprue bush is to be incorporated with the tool. Hot runner usually

Read More...
Release:odinmould   Classification:Mould design guide

Ejection System design

Ejection System An ejection is very much necessary in order to eject the moulded part from the tool. The design of ejection system is one of the major factors, how efficiently the tool will be in

Read More...
Pagination:«12345»
article.clear
panel.clear