Pagination:«12345»
Release:odinmould   Classification:About Plastic

Thermosetting plastics

Whatis Thermosetting plastics?Used where?The molecules of thermosetting plastics are heavily cross-linked. They form a rigid molecular structure.The molecules in thermoplastics sit end-to-end

Read More...
Release:odinmould   Classification:About Rapid Prototype

CNC rapid prototype

CNC rapid prototype Odin Mould can provide:CNC Machining Plastic & Alu manufactured parts3D Printing Rapid PrototypesSmall or big run Production Plastic Injection Moldingwww.odinmould.com&nbs

Read More...
Release:odinmould   Classification:About Plastic

Thermoplastics 热塑性塑料

There are a wide range of thermoplastics, some that are rigid and some that are extremely flexible. The molecules of thermoplastics are in lines or long chains with very few entanglements. When heat i

Read More...
Release:odinmould   Classification:About Plastic

plastic come from where

Plastic come from where??Origins of Plastics - synthetic plasticsThe main source of synthetic plastics is crude oil. Coal and natural gas are also used. Petrol, paraffin, lubricating oils and high pe

Read More...
Release:odinmould   Classification:About Plastic

Why use plastics

Why use plastics??Plastic are easily formed materials. The advantage to the manufacturer is that plastic products can be mass-produced and require less skilled staff. Plastics require little or no fin

Read More...
Release:odinmould   Classification:About Plastic

Blow moulding process

PVC, polythene and polypropylene are commonly used in blow-moulding.

This process is mainly used for making bottles, plastic buckets and similar shapes. A tube of softened (heated) plastic called a parison is extruded into a mould, then the mould is clamped closed at one end. Air is then blown under pressure into the interior of the parison, which expands to fill the mould and create the desired shape. 

...

Read More...
Release:odinmould   Classification:Mould design guide

冷卻系統 Cooling System

 冷卻系統Cooling System熱的熔體在型腔內冷卻、固化和定型。為了維持模具和熔體間的溫度差,冷卻液在模具內的孔道循環。連接整個軟管和孔道的系統叫作迴路。Hot melt is cooled, solidified and formed in the cavity. Tomaintain the required temperature difference between th

Read More...
Release:odinmould   Classification:Mould design guide

標準模座 Standard Mold Base

标准模座定义为标准模具零件的套装总成,这些零件采用一些标准的型式,以便大量生产和降低成本。这种模座可以装配好的模具单元形式购得,这种模具单元中的模板是不含型腔的,型腔则是留给专业模具厂去加工。标准模架定义为一个组合模具标准件,采用某种形式的标准化为了以量在降低成本制造它们。该模座可以购买的组装模具单元。该板在此模具单元不包含空腔的形式,因为这模具制造方面是留给专业模具制造商A standard m

Read More...
Release:odinmould   Classification:Mould design guide

Runners design

 For most normal injection moulding, runners with a circular (full round) section provide maximum flow.

Main runners should have a cross sectional diameter of 6mm to 12.7mm. Secondary runners should

...

Read More...
Release:odinmould   Classification:Mould design guide

INJECTION MOULD DESIGN

Mould typesTwo-plate, three-plate, hot runner, or runner less moulds can be used with the majority of Engineering Thermoplastic.Two-Plate Mould: The two plate mould is simple in design, yet vers

Read More...
Pagination:«12345»
article.clear
panel.clear